LOCTITE - Quick Set Epoxy Syringe - 0.85 fl. oz. (25 ml)

Previous Product | Next Product

Product Description

£4.99

DESCRIPTION
DETAILS
FACTS
DIRECTIONS
WARNINGS

Loctite Epoxy Quick Set is a two-part adhesive consisting of an epoxy resin and a hardener. When mixed in equal volumes, the resin and hardener react to produce a tough, rigid, high strength bond in 5 minutes for most projects. Available in a convenient dual syringe which delivers equal parts of both components every time. Loctite Epoxy Quick Set can be used as an adhesive for a wide range of materials or as a versatile filler for gap filling, surface repairs and laminating. Loctite Epoxy Quick Set does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement or sand for color matching. It can be sanded and drilled.
Recommended For

Bonding metal, glass, ceramic, wood, many rigid plastics, china, tile, fiberglass, concrete and stone
Great for crafting projects
Can be combined with fiberglass cloth for a durable patch

Not Recommended For

Polyethylene, polypropylene, Nylon�, Teflon�, or flexible materials
Applying at temperatures above 120�F (49�C)
Continuously wet areas or water immersion

Package Description: 0.85 fl. oz. (25 ml)

Serving Size: ..

Number of Servings: ..

Feature		Benefit
High impact resistance		Won't crack when drilled
Can be tinted		Matches surrounding materials
Water resistant		Can use outdoors
Will not shrink		One-time application
Convenient double syringe		Dispenses equal amounts of each component every time
Sets in 5-10 minutes		Quick completion of project

Safety PrecautionsApply in a well ventilated area. Wear gloves and wash hands after use.PreparationSurfaces must be clean, dry and free from oil, wax and paint. Roughen smooth surfaces for better adhesion. Pre-fit parts to be joined. Remove the plug from between the piston. Cut off the end tips of the syringe. Turn syringe end up and pull plunger back slightly allowing air bubbles to rise to top. Depress the double piston to dispense equal parts of the two materials on a disposable surface. Wipe syringe tips clean, retract piston slightly and close with the plug. Ensure that the plug is always placed in the same orientation on the tips. Mix resin and hardener for one minute thoroughly.ApplicationFor best results apply a small amount to both surfaces within one to two minutes of mixing adhesive and press together. Placing parts together close to the 5 minute set time will reduce adhesion. Remove any excess glue immediately with acetone. Support bond for 10 minutes at room temperature. Usable strength achieved in 8 hours. Fully cured in 24 hours.CleanupNot damaged by freezing. If frozen, warm to room temperature until the resin and hardener become liquid enough to mix. Use an approved hazardous waste facility for disposal.

Safety PrecautionsApply in a well ventilated area. Wear gloves and wash hands after use.

Not Recommended For

Polyethylene, polypropylene, Nylon�, Teflon�, or flexible materials
Applying at temperatures above 120�F (49�C)
Continuously wet areas or water immersion

HEALTHCARE DISCLAIMER

The products sold on this site are not approved to diagnose, treat, cure or prevent disease. Information on this site including any product label or packaging should not be considered as a substitute for advice from a healthcare professional.

This Site is not intended to provide diagnosis, treatment or medical advice. Products, services, information and other content provided on this Site, including information that may be provided on this Site directly or by linking to third-party websites are provided for informational purposes only. Please consult with a physician or other healthcare professional regarding any medical or health related diagnosis or treatment options.

Always check the product label or packaging prior to using any product. If there are discrepancies, customers should follow the information provided on the product label or packaging. You should contact the manufacturer directly for clarification as to product labeling and packaging details and recommended use. Please also consult your physician for a complete list of indications, warnings, precautions, adverse events, clinical results, and other important medical information.

All Vitamin Grocer orders are shipped from the East Coast of the United States. Vitamin Grocer offers two shipping options with different costs depending upon whether or not your order value is greater than £30. The standard processing time for all orders is 2 business days.

Vitamin Grocer's standard shipping option is DHL eCommerce's Packet International service. DHL transports the package from the Vitamin Grocer warehouse to your local mail carrier who delivers the package to your front door. Orders over £30 ship for FREE using this service. See table below for more details.

In addition, Vitamin Grocer now offers a shipping option with door-to-door tracking for an additional charge. This service is DHL eCommerce's ePacket service. Unlike our standard service, which generally only provides tracking up to the port of entry of the destination country. ePacket provides door-to-door tracking with delivery confirmation. See below for rates and additional details.