AQUEON - Submersible Aquarium Heater - 200 Watt

Product Description
£27.99

Aqueon Submersible Aquarium Heaters are made from thermal shatter-resistant quartz glass and were designed to absorb impacts, making them extremely durable. A LED indicator light comes on when unit is heating. UL approved, the heater is also programmed to turn itself off when not properly submersed to avoid overheating and damage. Electronic thermostat ranges from 68° to 88°F. The suction cups make horizontal or vertical installation quick and easy.

  • Shatter resistant
  • Adjustable heat setting 68 to 88°F
  • Precise temperature setting to 1°
  • Auto Shut-off
  • LED light turns on when aquarium water is being heated

Package Description: 200 Watt

Serving Size: ..

Number of Servings: ..

  • 150 Watts: for 55-75 gallon aquariums, 13" length.
  • Shatter resistant
  • Adjustable heat setting 68 to 88°F
  • Precise temperature setting to 1°
  • Auto Shut-off
  • LED light turns on when aquarium water is being heated

Step 1
Attach suction cups:
Remove sticker around power monitor light. Attach suction cups to heater. Attaching both suction cups will ensure proper positioning in your aquarium and will allow adequate water circulation around the heater for even heat distribution. Suction cups should be placed in the middle to upper portion of the heater.

Step 2
Set heater temperature:
Turn the adjustment knob until it corresponds to the desired aquarium temperature. As all aquariums vary, further adjustment may be required to maintain desired temperature.

Step 3
Heater installation
: Install heater in water filled aquarium. The heater works best when installed in the aquarium in the vertical position. The installation of the heater in this position requires that the aquarium must maintain a water level above the minimum water level on the heater. The heater can be installed in the aquarium in the horizontal position. The installation of the heater in this position requires that the heater be positioned fully submerged in water at all times.

Step 4
Plug into electrical outlet:
Allow for heater to be submerged in water for a minimum of 30 minutes prior to powering the appliance. Once heater has been mounted and submerged for the 30 minutes, plug the appliance into an electrical outlet. Once plugged in, the heater will automatically start working and the power monitor light will illuminate. A red light indicates the unit is heating and a green light indicates the unit has reached the set temperature.

Step 5
Adjust temperature:
Allwo the heater to run for 24 hours at the original setting prior to adjusting. Check the aquarium water with a reliable thermometer. Should the heater need to be adjusted from the original setting, slightly turn the adjustment knob + or - the number of degrees, as needed. Once adjusted wait 24 hours and repeat if necessary. Note: Do not overadjust the heater, this may cause harm to your aquarium inhabitants and environment. Make sure of the required temperature for your specific setup.

Caution: Before working with or installing heater, be sure to read and understand all safety instructions and warnings.

HEALTHCARE DISCLAIMER

The products sold on this site are not approved to diagnose, treat, cure or prevent disease. Information on this site including any product label or packaging should not be considered as a substitute for advice from a healthcare professional.

 

This Site is not intended to provide diagnosis, treatment or medical advice. Products, services, information and other content provided on this Site, including information that may be provided on this Site directly or by linking to third-party websites are provided for informational purposes only. Please consult with a physician or other healthcare professional regarding any medical or health related diagnosis or treatment options.

 

Always check the product label or packaging prior to using any product. If there are discrepancies, customers should follow the information provided on the product label or packaging. You should contact the manufacturer directly for clarification as to product labeling and packaging details and recommended use. Please also consult your physician for a complete list of indications, warnings, precautions, adverse events, clinical results, and other important medical information.

 

All Vitamin Grocer orders are shipped from the East Coast of the United States. Vitamin Grocer offers two shipping options with different costs depending upon whether or not your order value is greater than £30. The standard processing time for all orders is 2 business days.

Vitamin Grocer's standard shipping option is DHL eCommerce's International Priority Airmail (IPA) service. DHL transports the package from the Vitamin Grocer warehouse to your local mail carrier who delivers the package to your front door. Orders over £30 ship for FREE using this service. See table below for more details.

In addition, Vitamin Grocer now offers a shipping option with door-to-door tracking for an additional charge. This service is DHL eCommerce's ePacket service. Unlike our standard service, which generally only provides tracking up to the port of entry of the destination country. ePacket provides door-to-door tracking with delivery confirmation. See below for rates and additional details.

In addition to the UK, we also ship to Ireland, Finland, France, Netherlands, Norway and Switzerland. Unfortunately, door-to-door tracking is not currently available for deliveries to Norway.

 

 SHIPPING OPTIONS

ORDERS LESS THAN £30

ORDERS GREATER THAN £30

FREQUENTLY ASKED QUESTIONS 

 

[powr-faq id=4141c34f_1496769733]

 

 

Vitamin Grocer UK is a property of Lycka, LLC

2221 Industrial Highway

York, PA 17402

USA